Question: How Much Does It Cost To Have A Cast Iron Tub Refinish?

What is the difference between reglazing and refinishing bathtub?

Advantages: The cost of tub reglazing is lower than the cost of a full tub replacement or the cost of a new liner.

The average cost is about $452, according to Angie’s List.

A refinished bathtub can last for about 20 years if you care for it properly, which can be longer than the lifespan of a brand-new bathtub..

What kind of paint do you use on a cast iron tub?

For a cast-iron or fiberglass tub, you can use acrylic urethane enamel, which may already come mixed for you, or you may have to mix it it, just depending on what kind of kit you purchased. For fiberglass tubs, you can also use a two-part epoxy paint instead of the acrylic.

How long do cast iron tubs last?

15 to 20 yearsBut says Diane Robbins, co-owner of the franchise that resurfaced Jackie’s tub, with proper care and maintenance (nonabrasive and bleach-free cleaners only), a refinished cast-iron tub surface should last 15 to 20 years.

Does Reglazing a tub smell?

Personally the bathtub reglazing odor resembles the aroma of a room after it has been painted and therefore the fragrance will keep within the facility for up to 2 days, this is not body odor we are talking about it will go away.

Is there a paint for bathtubs?

Unlike your standard interior paint options, which will crack and peel at the amount of heat and moisture tubs are exposed to daily, epoxy boasts great adhesion and long-lasting durability once cured. A one-quart kit should be enough to cover the bathtub, but pick up two if you also plan to paint the surrounding tile.

How long does refinishing a bathtub last?

10-15 yearsRefinishing helps protect the integrity of your bathtub. However, constant care in terms of weekly cleaning and maintenance is required to keep moisture and unwanted agents such as mold from deteriorating your finish and potentially damaging your bathtub. When given proper care, your reglaze will last 10-15 years.

Can I resurface my bathtub myself?

Do-it-yourself bathtub refinishing is even more inexpensive than hiring the pros, but you will end up with an inferior finish that is more likely to peel. … ​You can buy DIY kits that include a quart of epoxy with hardener, latex gloves, steel wool, brush, cleaning solution, cleaner/thinner, and safety goggles.

How many times can you Reglaze a tub?

“The material used to etch and glaze is very toxic and the customer would need to leave their house for a day or two so the house could ventilate properly,” said Vince Albachiaro, a merchant for Home Depot’s home services. Reglazing can only be performed once.

How do you refurbish a clawfoot tub?

Table of ContentsStep 1: Remove the Old Tub.Step 2: Prepare the Tub for Reglazing.Step 3: Use Acid-etch Cleaner.Step 4: Degrease the Tub.Step 5: Use Adheser.Step 6: Apply Primer.Step 7: Add Finish Coat.Step 8: Size and Cut Drain Pipe.More items…

How long does a bathtub last?

With proper care and maintenance, refinishing can extend the useful life of your fixtures for up to 15-20 years or more. In fact, we’ve been around long enough for many of our customers to tell us that their bathtubs still look and feel great after more than 15 years.

Are cast iron tubs worth anything?

Short Answer: Depending on your cast iron bathtub’s weight and condition, it may be valuable either for resale or scrap. Cast iron bathtubs are generally worth up to $50 at scrap yards. Tubs in good condition can bring anywhere from about $300 to $2,500 on the resale market.

Is Bathtub Refinishing worth it?

Bathtub refinishing is worth the money if your tub is in good working condition. The reglazing process can remove surface imperfections, like scratches, shallow cracks, and stains. But if your tub is old, leaking, or full of mold, reglazing is just a waste of money. You’ll have to buy a new tub soon anyway.

How do you Reglaze a bathtub yourself?

Tub or Shower Refinishing: Basic ProcessRemove or tape drain and fixtures.Scrape the tub with a razor.Dull the surface with etching powder.Sand the surface.Clean with a tack cloth.Tape the caulking.Apply the primer.Apply the coating with a roller, then with a brush.More items…•

How much does it cost to resurface a clawfoot tub?

The average cost to refinish a clawfoot tub is $300 to $650, depending on the size and condition. Clawfoot tub issues such as erosion, rust, pinholes, scarring, lead paint, or chips need to be addressed before reglazing. Refinishing takes 4 to 5 hours and typically comes with a 3 to 10-year warranty.

How long do you have to wait to take a shower after Reglazing your tub?

24 hoursHow soon can I use the tub after it has been resurfaced? The tub is ready to use 24 hours after the job is completed. DO NOT CLEAN THE TUB DURING THIS PERIOD.

How do I know if my tub is cast iron?

A cast iron tub will sound like a deep gong, just as if you hit a cast iron frying pan. Look at the bottom of the tub if possible. A cast iron tub will be black, and a steel tub will be metallic, although it may be covered with a layer of paint. An acrylic tub will look like coated plastic.

How much does it cost to have a bathtub painted?

Cost also varies, but most homeowners appear to be spending around $550 for the service. Some homeowners say that they have paid $250-$300 for bathtub refinishing, but these also tend to be the homeowners complaining about the poor quality.