Quick Answer: Do You Cut Plywood Good Side Up Or Down?

Which side of wood do you cut?

In most cases, we recommend cutting to the outside of the line.

You can always take more wood off, but you can’t get it back once you’ve started your cut.

The saw blade should move just along the side of the line.

If you cut to the pencil line, the thickness of your blade might take off more material than you expected..

Can I use a jigsaw to cut plywood?

The jigsaw can be used to make both straight and curved cuts in a wide variety of materials, including wood, particleboard, plywood, plastic, metal, even ceramic tile. It’s also safe and easy to use, which is why it’s often the very first power saw a new DIYer buys.

Why does my jigsaw not cut straight?

To Cut Straight your Jigsaw Needs a Guide Bearing This almost completely eliminates and side to side movement of the blade (it can still happen if you turn too sharp, or the blade gets stuck in warped or poorly supported material).

What is the best jigsaw blade to cut plywood?

Instead, select a 10- to 12-tpi blade for larger, gradual curves, or a 20-tpi blade for tight curves (1″ radius or less) in solid wood and all cuts in plywood or melamine-coated particleboard.

How do you cut plywood without splintering?

How to Avoid Splintering and Tearing when Cutting PlywoodAlways use an appropriate blade for plywood, and be sure that it’s sharp. … Be sure the good face of your plywood is closer to the outside of the blade. … Then, add a strip of masking tape to both the top and bottom of the sheet, directly over the cut line.More items…•

When using a circular saw good side up or down?

Circular saws usually splinter the wood that’s facing up and cut cleanly on the side that’s facing down. So when you’re cutting veneered plywood, always position the material “good side down” so the teeth of the blade are pushing the veneer up against the core rather than ripping it away.